*
"Everyone deserves a JmGO"
News:


Welcome, Guest. Please login or register.

Login with username, password and session length

Directv Resolution Setup 5770

Administrator Sr. Member Posts: 366 Karma: +0/-0 "Everyone deserves a JmGO" *****
Directv Resolution Setup
« on: December 05, 2016, 09:19:40 PM »
There are a lot of people who do not realize their Directv resolution is not set to optimum and can be improved greatly. I was one of those people!

Here is how to set your DIRECTV receiver so you can watch the best Resolution your JmGO Smart Theater (or TV) can support with Directv. Please note currently Directv's maximum resolution is 1080P. Readers please correct me if that is not the case.

The following is an update to the original discussion thread found at this link https://www.techwalla.com/articles/how-to-increase-resolution-of-directv-satellite-receiver

DirecTV satellite receivers come with the ability to change the screen resolution, allowing you to see brighter and clearer pictures with higher resolutions.

Depending on the type of resolutions your JmGO Smart Theater or television supports, it is possible to adjust the resolution output of a DirecTV receiver to show a picture on the screen much better than the one you may already be viewing. Determining which resolution outputs your JmGO or television supports is key. Fortunately, you can determine this with the receiver itself.

STEP 1
Press the "Menu" button on the remote control. Press the down arrow button to highlight "Settings & Help" then press the "Select" button.

STEP 2

On the  "Settings" icon press the "Select" button.  Press the down arrow button to select "Display" then press "Select". Scroll down to "TV Resolutions" then press "Select".

STEP 3
Use the arrow keys to highlight each resolution option that you see listed. Press "Select" and the receiver determines if your JmGO or television supports the resolution selected. If it does, you see a message confirming that it does. If it does not, you see a message confirming it does not.

STEP 4
Note the highest resolution your JmGO or television supports. The 480i and 480p resolutions are the lowest that can be supported, while the 1080i and the 1080p resolutions are the highest that can be supported. If your JmGO or television does not support 1080 at all, then 720p is the highest resolution you can get. If neither 720p or 1080 are supported, 480p is the highest you can get. All JmGO Smart Theaters support 720p HD minimum.

STEP 5
Look on the front panel of your DirecTV receiver. Below the "Guide" button you should see a button labeled "Resolution," with four numbers next to it. The numbers should read "480i," "480p," "720p" and "1080i." Press the "Resolution" button until the LED light above the highest resolution your JmGO or TV supports shines green.

TIPS & WARNINGS
* If your JmGO or television supports all the resolution formats, you can select "All" from the "TV Resolutions" tab. This allows you to turn on "Native" mode, which automatically adjusts the receiver to the highest resolution available for a given channel on your television.
« Last Edit: December 07, 2016, 08:35:57 PM by Keith »

Where there is JmGO there is cinema.

 

[url=link]Text[/url]